How To Reduce Your Air Conditioner’s Energy Consumption
Air conditioners (ACs) are one of the most commonly used electrical appliances. They help cool down and dry the air, so it is no wonder why they are very popular in hot and humid places. However, they usually make up a large part of your monthly electricity bill. Compared to other electrical appliances, air conditioners consume more energy. So it is no wonder why your electricity bills usually go up in the summer. That is why many people are desperate to find out how to use the air conditioner. Below are some tips you can try to reduce your air conditioner’s energy consumption:
– When buying an air conditioner, people commonly think that the bigger, the better. However, this is not necessarily true. You should match the size of the air conditioner to the size of your room. Another factor such as things that affect the room temperature should also be your consideration. An air conditioning unit that is too big for your room will work harder and finally increase your cooling costs.
– If you plan to establish a basic air conditioning system, make sure that the seasonal energy performance ratio is 13 or better. The lower the ratio, the more you will have to pay.
– Regular maintenance of your AC is every necessary. It is recommended that you replace the filter monthly during the cooling season. At the beginning of the cooling season, it is a good idea to have a professional service the system.
– Air conditioning unit is one of the biggest energy guzzlers at home. If your old conditioning system has a SEER rating less than 8, it would be worthy to replace it with the more efficient one.
– Install an adjustable thermostat. This way, you can set the temperature of the air conditioner according to your needs. When you are at home, set it to 78 degrees. If you will be gone for more than an hour, set it to 85 degrees.
– Make sure that your unit is placed at a shady spot. Additionally, there should be enough available room for it to dispose heated air from your home.
– To reduce heat naturally, you can plant shade trees around the house. This way, you can lower your cooling costs by up to 30 percent.
– Close the blinds or drapes on the exterior of your home that is presented to sunlight. Additionally, it would be wiser for you to use light colored curtains.
– Install energy efficient ceiling fans to reduce the cooling cost. Run the fan and air conditioner at the very time on hot days to raise the temperature setting of the AC.
– Choose light colors for your exterior. Dark colors will absorb more heat while light colors reflect light as well as heat.
– Approximately 30 percent of the heat in your house comes from the roof. Thus, make sure that your attic is well ventilated. You can also install an attic fan to reduce the cooling cost.
3 Ways To Keep Your Air Conditioner Working All Summer
Not having an air conditioner that works properly can be dangerous, especially as the hottest days of summer come around in July and August.If you have elderly family members, pets, or children, keeping your AC running smoothly is ultra important.
The problem is, many people do not think of their AC units until they break. This is an unfortunate and expensive way to go!
There are three simple ways to keep your air conditioning running at full blast all summer. And, they will cut down on your energy use too, so, your bills will be lower while you stay cool and comfortable.
1. Have Your AC Serviced
A simple servicing by an HVAC professional or from local air conditioner repair services can save you thousands of dollars in repairs. Many homeowners avoid this check up because most pros charge a small fee .
But, when you weigh the few dollars that servicing costs vs. the 5 – 20,000 dollars a new central air unit will cost, it’s a no-brainer.
What Should They Look For?
Most check ups will take a look at:
-Coils (condenser coils are responsible for cooling the air that the AC uses. If the coils are damaged, dirty or broken, you will get no cold air)
-Thermostat (the thermostat controls the temperature, if it is not working, your air can not be cooled)
-Fans and Belts (any small part can break down, and belts and fans often wear down quickly and cause the AC unit to work harder to cool your home)
-Electrical Wiring (any malfunctioning wire can lead to your unit not turning on, not working, or having to work too hard to cool, costing you more money on your electric bill)
2. Seal Your House
This is more for your house than for the AC unit specifically, but making sure that no air can get in or out of your home around windows and doors is key to keeping all of that fresh air inside. And, it keeps warm air out. This alone can save you a ton on your electric bills.
3. Use a Fan and Energy Saver
Most air conditioner units now have an energy saver feature. This allows the AC to automatically switch to “fan” when the temperature in your home reaches a certain point. This keeps the unit from running continuously and can cut down on wear and tear and keep the energy bills down.